Peacock Dial Gauge
Code : 15Z, 15Z-SWF, 5Z, 5Z-XB, 15DZ, 18, 36Z, 117Z, 17Z, 17Z-SWA, 107Z, 107Z-XB, 17B, 47SZ, 196Z, 147Z, 47Z, 47Z-XB
These are high-accuracy dial gauges with the pointer giving less than a full turn that
can resist rigorous rigorous continuous measurement.
The long stem is made of stainless steel, is high in strenght and is malfunction-free
due to fastening.
The dial faces except No. 18 and 17B are easy to read with green and orange
(dead zone)
| One Revolution Dial Gauges; 0.001mm, 0.005mm and 0.01mm Z series | ||||||||||||||||||||
|
|
|
||||||||||||||||||
|
|
|
||||||||||||||||||
|
|
|
||||||||||||||||||
|
|
|
||||||||||||||||||
|
|
|
||||||||||||||||||
|
|
|
||||||||||||||||||
Contact Point ( XB-1 )
| Specifications | ||||||||||||
| Model | Graduation (mm) |
Range (mm) (Free stroke) |
Reading | Indication error (µm) | Backward error (µm) |
Repeatability (µm) |
Measuring force less than (N) |
|||||
| Revolution | Whole measuring range |
|||||||||||
| 1/10 | 1/2 | One | Two | |||||||||
| 15Z | 0.001 | 0.16 (3.0) | 80 – 0 – 80 | 2.5 | ±3 | ±4 | — | — | 3 | 0.5 | 1.5 | |
| 15Z-SWF | 0.001 | 0.16 (3.0) | 80 – 0 – 80 | 2.5 | ±3 | ±4 | — | — | 3 | 0.5 | 1.5 | |
| 5Z | 0.001 | 0.14 (3.0) | 70 – 0 – 70 | 2.5 | ±3 | ±4 | — | — | 3 | 0.5 | 1.5 | |
| 5Z-XB | 0.001 | 0.14 (3.0) | 70 – 0 – 70 | 2.5 | ±3 | ±4 | — | — | 3 | 0.5 | 1.5 | |
| 15DZ | 0.001 | 0.16 (3.0) | 80 – 0 – 80 | 2.5 | ±3 | ±4 | — | — | 3 | 0.7 | 1.5 | |
| 18 | 0.001 | 0.16 (3.0) | 80 – 0 – 80 | 2.5 | ±3 | ±4 | — | — | 3 | 0.5 | 1.5 | |
| 36Z | 0.005 | 0.4 (3.0) | 20 – 0 – 20 | — | — | ±10 | — | — | 5 | 5 | 1.4 | |
| 117Z | 0.01 | 1.0 (7.0) | 50 – 0 – 50 | 8 | ±9 | ±10 | — | — | 5 | 5 | 1.4 | |
| 17Z | 0.01 | 0.8 (7.0) | 40 – 0 – 40 | 8 | ±9 | ±10 | — | — | 5 | 5 | 1.4 | |
| 17Z-SWA | 0.01 | 0.8 (7.0) | 40 – 0 – 40 | 8 | ±9 | ±10 | — | — | 5 | 5 | 1.4 | |
| 107Z | 0.01 | 0.8 (7.0) | 40 – 0 – 40 | 8 | ±9 | ±10 | — | — | 5 | 5 | 1.4 | |
| 107Z-XB | 0.01 | 0.8 (7.0) | 40 – 0 – 40 | 8 | ±9 | ±10 | — | — | 5 | 5 | 1.4 | |
| 17B | 0.01 | 0.8 (10) | 40 – 0 – 40 | 8 | ±9 | ±10 | — | — | 5 | 5 | 1.4 | |
| 47SZ | 0.01 | 0.8 (4.0) | 40 – 0 – 40 | 9 | — | ±13 | — | — | 6 | 5 | 1.4 | |
| 196Z | 0.01 | 0.8 (4.0) | 40 – 0 – 40 | 10 | ±12 | ±15 | — | — | 6 | 5 | 1.4 | |
| 147Z | 0.01 | 1.0 (4.0) | 50 – 0 – 50 | 9 | — | ±13 | — | — | 6 | 5 | 1.4 | |
| 47Z | 0.01 | 0.8 (4.0) | 40 – 0 – 40 | 9 | — | ±13 | — | — | 6 | 5 | 1.4 | |
| 47Z-XB | 0.01 | 0.8 (4.0) | 40 – 0 – 40 | 9 | — | ±13 | — | — | 6 | 5 | 1.4 | |