- KETT
The FD-800 employs a dual temperature sensing method to achieve highly precise moisture measurements. In addition to the thermistor that measures the
environment temperature within the drying chamber, it is mounted with a radiation thermometer that measures the sample temperature directly without contact.
CATALOGUE| Specifications | FD-800 |
|---|---|
| Measurement method | Detection of weight loss by heating & drying |
| Sample mass | 0.1-120g (optional weight sampling) |
| Measurement subject | Moisture / Solid content / Weight |
| Measurement range | 0-100% (wet base, solids); 0-500% (dry base) |
| Repeatability (Standard deviation) | Sample with a weight of 5g or higher : 0.05% Sample with a weight of 10g or higher : 0.02%) |
| Resolution | Moisture percentage 0.01% / 0.1%; Weight 1 mg Temp. setting range for thermistor (T1) : 30 – 180˚C (1˚C interval); for radiation thermometer (T2) : 30 – 250˚C (1˚C interval) |
| Measurement modes | Automatic stop mode, Timer stop mode, Rapid drying mode, Equilibrium drying mode, Step drying mode, Predictive (comparative) measurement mode |
| External output | RS-232C interface |
| Environmental conditions | Temperature 5~40˚C, Humidity : max of 85%RH Pollution degree 2, Altitude up to 2000m |
| Sample dish | SUS (diameter 130 mm, depth 13 mm) |
| Heat source | Mid-wave infrared quartz heater (200Wx2) |
| Power source | AC100~120V / 220~240V (50/60Hz), Max 900W |
| Dimensions & weight | 220(W)x415(D)x220(H), 5.4Kg / Shipment 10Kg |
| Accessories | Spare Sample Pan, Aluminum Sheets, etc. |
| Options | Printer VZ-330 (incl. cable VZC-14), 10x Printer paper rolls, 500x Aluminum sheets, Radiation thermometer calibration kit GF-200 (digital thermometer, standard heating sample), Data logger software FDL-02, Windshield with deodorizer case FW-100 |