Peacock Linear Gauges 10, 20mm range
Code : D-10, D-10S, DN-10, DN-10S, D-20, D-20S, DN-20, DN-20S
Brand : Peacock
| Linear Gauges 10, 20mm range |
|
| | Specifications | Options | Dimensions | Common Specifications of Linear Gauges | |
Measurement range (0 – 20mm)
* 10mm and 20mm measurement ranges are the easiest to use.
* Used in conjunction with digital counters, these gauges can be set up in places
where dial gauges are now being used.
* Set the gauge by either stem or lug back.
* For lifting spindle, both lever and release types are available. |
Rectangular wave output typ (DN-10/DN-10S/DN-20/DN-20S)
* For use in electrically noisy environments.
* For applications requiring extra long cables. (10 to 50 meters are available) |
 Output wiring (DN-10/DN-20)
 |
Output wiring (DN-10S/DN-20S)
 |
| Specifications |
| Model |
D-10 |
D-10S |
DN-10 |
DN-10S |
D-20 |
D-20S |
DN-20 |
DN-20S |
| Range |
10mm |
20mm |
| Resolution |
0.01mm |
0.001mm |
0.01mm |
0.001mm |
0.01mm |
0.001mm |
0.01mm |
0.001mm |
Accuracy (excluding
quantized error) |
0.005mm |
0.002mm |
0.01mm |
0.002mm |
0.005mm |
0.003mm |
0.01mm |
0.003mm |
| Measuring force |
Less than 1.0N |
Less than 1.5N |
|
| Cable length |
2m |
| Mounting method |
Ø8mm stem or 6.5mm hole on lug back |
| Contact point |
M2.5 × 0.45 SØ2.4mm cooper (X-2) |
| Operating temperature |
0 – 40ºC |
| Weight |
220g |
300g |
| Output Signal |
90º phase difference, 20µm pitch (R03-PB8M Tajimi connector)
Rectangular wave (Low=0V High=8V) |
Compatible standard
counters |
C-500 / C-700
CM-5B |
| Options |
* Release (RE-4) Lifting lever (LL-1)
* Dust proof rubber (BG-10)
* Flat back (GB3-D1O) , screws (S-110) |
* Release (RE-4)
* Flat back (GB3-D20) |
* Customer must specify if application is up-side-down.
The measuring force changes when the gauge is inverted. |
* Features
DN-10 DN-10S DN-20 DN-20S
1. Recommended for locations where cable extension (10 to 50 meters) is necessary.
2. Recommended for use in electrically noisy environments.
Notes of wiring : A signal wire should be duct wiring apart from other Power lines. |
| Options |
 Split collar(WB-1)
Split collar above is used on the Ø8mm stem
during mounting to prevent malfunction due over
tightening.
Securing by means of screw directly in stem may
result in malfunction. |
Dust proof rubber(BG-10)
Compressible dust proof rubber fits all D-5, D-5S，
D-10S ,D-10SS ,D-10HS gauges.
(Stroke under 10mm) |
Release(RE-4)
Total length 300mm |
Lifting lever(LL-1)
 |
Extension cable
2, 3, 5 and 10 meters are standard lenght. |
Extension cable with metal sheathing
2 and 3 meters are standard lenght. |
| Dimensions |
D-10 / D-10S / DN-10 / DN-10S / D-10SS
 |
D-20 / D-20S / DN-20 / DN-20S
 |
|
