 Specifications |
| Model |
CM-5B |
C-7HS |
| Resolution |
0.005mm or 0.001mm
select by conversion switch |
0.0001mm ( 0.1µm ) / 0.0005mm ( 0.5µm ) to convertible
( Please specify either 0.0001 or 0.0005mm
display at the time of purchase.) |
Display
capacity |
For 0.005mm, up to 5 digits
(+00.000 – +999.995) with ± symbol
For 0.001mm, up to 5 digits
(+0.000 – +99.999) with ± symbol |
6 digits display
with ±sign ±99.9995 / ±99.9999 |
| Response speed |
1000mm / sec at 0.005mm setting
and 600mm / sec at 0.001mm setting |
100mm/sec |
Judgement
setting Display |
Lower and Upper limit setting
via digital switch of 6 digits each |
— |
| Quantizing error |
± 1 count |
± 1 count |
Judgement
Output |
Output from relay contact point
(a contact point)(DS1-S-DC5V
Matsushita or equivalent product) |
— |
Judgement
Display |
-NG (Yellow), OK (Green) & +NG (Red) |
— |
Operating
temperature |
0 – 40ºC |
0 – 40ºC |
| Power supply |
AC100V – AC240V 50/60Hz |
AC100V – AC240V 50/60Hz |
Weight /
Dimensions |
2.2kg / 200(W)×230(D)×70(H)mm |
2.1kg / 200(W)×230(D)×60(H)mm |
| Accessories |
Judgement output connector
(PRC03-12A10-4F10.5 Tajimi brand) |
Built-in tilt stand (tilts the front of the
counter up at slight angle for easier reading) |
Compatible
linear gauges |
DL-2(S) / D-5(S) / D-10(S) / D-20(S)
D-50(S) / D-100(S)
D-5UZ / DN-10S / DN-20S |
| D-10HS; |
0.0001mm ( 0.1µm ) / 0.0005mm ( 0.5µm ) |
| D-10SS; |
0.0005mm ( 0.5µm ) |
|
Data output
(BCD OUT) |
Output by positive logic, parallel digits and open collector |
| Functions |
 User selectable resolution
(0.001mm at time of shipment). |
Equipped with failure alarms
(When counting error or
gauge fails, display blinks) |
Judgement output is constantly on
(control output is possible with
an additional optional connector) |
Setting values for judgement is
included in ±NG at shipment
(Changeable) |
BCD output can be connected to,
for example, a sequencer by using
open collector. |
|
| RESET |
;For zero reset at any desired position |
| DIRECTION |
;Numerical direction can be changed by
DIRECTION switch located on back panel |
| ALARM OUT |
;Output abnormal value when response
speed is exceeded |
| LATCH IN |
;Holds the display value and external
unit’s output data |
| RESET IN |
;For zero reset from external unit via its
RESET input |
|
| Options |
Additional pass/fail detection
control connector
(attachable to the back panel).
Includes CM-5B-CONT. |
Extemal RESET/LATCH connector
is added (on back panel). CM-5B-RL. |
Tilt stand is added
(for tilting display for easy viewing).
CM-5B-ST. |
|
| Printer (PDP-1N) — Statistic operation |
| External RESET/LATCH function; C-7HS-RL. |
|
